Filter
Top Products
72
LAMP REPLACEMENT
6.
Without installing the lamp cover, the power will be off and the Lamp Indicator will flash (see page 8). Be sure to install the lamp
cover by re-engaging the two clips and tighten the screws before turning the power on, otherwise it may cause unusual colors.
NOTE: IF POWER IS CONNECTED BEFORE THE LAMP COVER IS INSTALLED, THE POWER WILL
BE OFF AND THE LAMP INDICATOR WILL FLASH (SEE PAGE 8 ).
7. Plug power cord into AC outlet and turn on the main power switch.
120V
NO
TE:
This product contains lead and a lamp that contains mercur
y
.
Dispose of this product and its lamp in accordance with
applicable environmental laws. For lamp recycling and disposal information, go to www.lamprecycle.org. For product
recycling and disposal information, contact your local government agency or the Electronic Industries Alliance at
www
.eiae
.org (in the US) or the Electronic Product Ste
w
ardship Canada at www
.epsc.ca (in Canada).
For more information, call “1-800-HITACHI.”
LAMP REPLACEMENT
LAMP COMPARTMENT
PHILLIPS HEAD
SCREW DRIVER
Downloaded from www.Manualslib.com manuals search engine