Filter
Top Products
• Mounting screw
The screws must be ISO (M3X0.5) to mount the DVD-ROM drive tightly and to
avoid damaging the mechanism inside the DVD-ROM drive. (See page 10)
• Moving your DVD-ROM drive
Remove the disc and close the disc tray before moving the DVD-ROM drive. If
your DVD-ROM drive is moved with the disc loaded or the disc tray opened, both
the disc and the DVD-ROM drive may be damaged.
• Cleaning of the DVD-ROM drive, discs
• Never clean your DVD-ROM drive and discs with silicon cloths or
cloths soaked in water, solvents (thinner, benzine), abrasive
cleaner, anti-static sprays, any record cleaner sprays, liquid cleaner
or aerosol cleaner. It may damage or discolor the coating of the
DVD-ROM drive and damage or deform discs.
• Clean your DVD-ROM drive including the disc tray and discs with a
clean, dry, soft cloth at least once a month.
• Cleaning of disc
If you begin to get error messages that your drive is unable to read a disc, it may
mean that cleaning is needed.
• Eject the disc and visually inspect the disc for scratches.
If there are scratches on the surface of the disc, change the disc.
• Eject the disc and clean as follows:
1. Clean the disc with a clean, dry, soft cloth.
2. Clean your DVD-ROM drive's pick-up lens using a cleaning disc.
GD 2000 DVD ROM Manual Page
Precautions For Care
GD-2000 Manual 6/18/98 5:23 PM Page 7