Filter
Top Products
24
You can search by input the time code.
The time code corresponds to the approximate actual playing
time. For example, to search for a scene 2 hours 30 minutes 20
seconds past the beginning, key in 02:30:20.
Note
• This function is not available for CD and MP3.
STANDBY
DVD
TUNER
AUX
2
5
8
0
SLE EPREPEATA- B
N/P
MEN U/ PBC
SLOW/MEMOR Y
Zoom
EQ
Language
AUDI O
Go To
Sub Ti t l e
ANGL E
Return DISPLAY
MUTE
SEL ECT
ADJ /VOL
SET UPTITLE
PLAY /PAU SE
OPEN/C LOSE
PROG
LISTENING
ENT
POW E R
If the playing disc is DVD
1 Press the GOTO button, the following menu appears on the
TV screen.
TITLE 02 / 05 CHAPTER 001 / 006
2 Use the or button to select title number or chapter
number.
TITLE 02 / 05 CHAPTER 001 / 006
TITLE 02 / 05 CHAPTER 001 / 006
Use the number buttons (0~9 / >10) to input the title or chap-
ter number you want.
3 Press ENTER to play your selection.
4 Follow Step 1, press the GOTO button again to enter time
menu shown as below.
TITLE 02 / 05 TIME - - : - - : - -
5 Use the number buttons (0~9 / >10) to input the time code
you want.
For example, key in 0, 1, 2, 3, 4, 5.
TITLE 02 / 05 TIME 01 : 23 : 45
6 Press ENTER to start playing (from the point of 01:23:45).
7 Follow Step 4, press the GOTO button again to exit.
Note
• If the title number, chapter number or time code you input is not
exist in the disc, the system will not execute your selection
and the selecting menu will exit.
• The selecting menu will time out for a few seconds if you do not
input valid number.
• For some DVDs, this function is ineffective.
If the playing disc is CVD, SVCD or VCD
1
Press the GOTO button.
The time menu appears on the TV screen.
GOTO: - - : - -
2 Use the number buttons (0~9 / >10) to input the time code
you want.
For example, key in 0, 1, 2, 3.
GOTO: 01 : 23
When the last digit is input and the time code is valid, the
system will begin to play (from the point of 01:23).
3 Follow Step 1, press the GOTO button again to exit.
Selecting a Selecting a
Selecting a Selecting a
Selecting a
TT
TT
T
rr
rr
r
acac
acac
ac
k Usingk Using
k Usingk Using
k Using
Number ButtonsNumber Buttons
Number ButtonsNumber Buttons
Number Buttons
You can select a track directly using the number (0~9 / >10)
buttons.
• In AUX mode, this button is useless.
• In Tuner mode, use this button to enter station number directly.
• In DVD mode, use this button to enter tilte, chapter or track
number to select it directly, or key in password to unlock the
parental control function in setup menu.
Note
• If the PBC function is set to on, you cannot select the track on
the CVD, SVCD or VCD2.0 using number buttons directly. About
PBC, see page 21.
Selecting a StarSelecting a Star
Selecting a StarSelecting a Star
Selecting a Star
t Pt P
t Pt P
t P
oint Using the oint Using the
oint Using the oint Using the
oint Using the
Time CodeTime Code
Time CodeTime Code
Time Code