Hitachi L22DP03U Flat Panel Television User Manual


 
- 33 -
Analogue TV Menu System
Sound Menu
SOUND
Volume
Balance 0
Sound Mode Stereo
On
Effect
Off
Back : Menu
Exit : TV
Equalizer
Volume
When you enter the sound menu, Volume will
be the first selected option. Press
/
button
to change the level of the Volume.
Balance
This setting is used for emphasizing the left
or right speaker balance.
Press or button to select Balance. Press
/
button to change the level of the balance.
Balance level can be adjusted between
-32
and + 32.
Sound Mode
Press or button to select Sound Mode.
Using
/
button, you can select Mono,
Stereo, Dual I or Dual II mode, only if the
selected channel supports that mode.
Effect
If you are watching a mono broadcast, set
Effect on to obtain a better sound effect which
will be more stereo-like. If the current sound
system is stereo, switching this effect on will
give a more spatial effect.
Press
or button to select Effect. Press
/
button to set Effect as On or Off.
Equalizer
Press or button to select Equalizer. Press
/
button to change the Equalizer setting. In
equalizer menu, the mode can be changed to
Flat, Speech, Music, Personal and Jazz.
Select the desired frequency by pressing /
button and increase or decrease the frequency
gain by pressing
/
button.
Note: Equalizer menu settings can be changed only
when the mode is in Personal.
HP Volume
To adjust headphone volume level, press
or button to select HP Volume. Press
/
button to change the level of the HP Volume.
Store
Select Store by pressing
/
button. Press
or OK button to store the settings. “Stored
will be displayed on the screen.
Picture Menu
PICTURE
Picture Mode Bright
Brightness
Contrast
Colour
Sharpness
Back : Menu Exit : TV
Picture Mode
For your viewing requirements, you can set
the related
mode option.
Press
or button to select Picture Mode.
Press
or button to choose from one of these
options:
Bright,Standard, Soft and Manual.
Brightness/Contrast/Colour/
Sharpness/Tint
Press or button to select the desired
option. Press
/
button to set the level.
Hint: Tint (Hue) is displayed in picture menu when
the TV receives an NTSC signal.
ENG-01-TV-22856W-1165UK-MB29-UKIDTV-(1SCRT-AV-YPBPR-HP-SPDIF-STRLOUT-PCIN)-10059170-50138225.p6518.11.2008, 09:1633