Hitachi L32A01A Flat Panel Television User Manual


 
11
COMPONENT NAMES (continued)
Remote Control
Sub Power
Press this button to switch TV On or Off standby.
Function Select (TV /AV)
Press this button to select function mode.
Normally, select “TV”. DTT input is not available.
Program Select [Page Select]
Press these buttons to select a TV program directly.
Freeze [Hold]
Press this button to change the picture to freeze mode.
Press it again to return to normal picture.
(Also, it holds the page in teletext mode.)
CHI/II
This is exclusively for TV audio A2/NICAM mode.
Volume Up/Down
[Color]
TV/Text [TV
Text]
This switches between the TV mode and the Teletext mode.
Time [Cancel]
Press this button to display the time when receiving a TV program.
The time is not displayed if the recevied signal does not have any time
information.
Menu [Back Light]
Cursor
OK
Off Timer
This automatically sets the power to standby mode when the selected
time period has elapsed. (0306090120min.)
Input Select
Press these buttons to change input mode.
HDMI2, HDMI3 input are not available.
Not Available
Not Available
Recall
Press this button shows the input signal status.
Picture Mode
Picture mode can be changed each time pressed in the following
sequence. DynamicNaturalCinema
Sound Mode
Sound mode can be changed each time pressed in the following
sequence. MovieMusicSpeechFavorite.
Text
Press to activate and to exit from Teletext.
Not Available
Channel Up/Down[Page select]
Mute
[Reveal]
[Subtitle]
[Index]
Return
You can use this to return to the previous menu.
Not Available
Picture Size [Zoom]
Press this button to change picture size.
NOTE
Some buttons are only for Teletext mode, and other buttons have different functions in Teletext mode from the use of TV
mode. Those buttons are indicated by [ ]. Refer to "About Teletext" on
34
and
35
.