Hitachi L32A01A Flat Panel Television User Manual


 
41
TROUBLESHOOTING (continued)
Symptom and Check List (continued)
Symptoms Check list
Page
The image on the screen is moving in an
oblique direction.
(PC input mode only)
Adjust “Horizontal Clock” and “Clock Phase”.
32
The coarse horizontal stripes could be
seen in full-display mode.
(PC input mode only)
Adjust “Horizontal clock”.
32
The part of the image is lacking.
(PC input mode only)
AAAAA
Try “Auto Adjust”.
32
The horizontal stripes are moving
vertically with flickering screen.
(PC input mode only)
Check the Signal status of the PC by
pressing Recall button
on the remote
control.
32
When the characters are displayed on
the whole screen, the vertical stripes
appear and some of the characters are
blurred.
(PC input mode only)
abcdefgABCDEFGabcd
abcdefgABCDEFGabcd
Try “Auto Adjust”.
If the display condition is not improved with
Auto Adjust, adjust “Horizontal Clock”.
32
When the letter string is displayed in
full-screen, all of the characters
on the
screen is blurred.
(PC input mode only)
abcdefgABCDEFGabcd
abcdefgABCDEFGabcd
Try “Auto Adjust”.
If the condition is not improved with Auto
Adjust, adjust “Clock Phase” till you get
clearest image.
32
When the small patterns are displayed
on the screen, the entire screen is
flickering.
(PC input mode only)
Try “Auto Adjust”.
If the condition is not improved with Auto
Adjust, adjust “Clock Phase” till you get
flicker-free display.
32
Image cannot be displayed in the correct position.
(PC input mode only)
Press button to check if input signal of
the displayed image is compatible with the
specification of the television.
42
,
45