Filter
Top Products
Once the TV has found all your local stations, they are then automatically
assigned a programme numberand name, if available from the broadcast.
important note before starting Auto Setup
important note.
start A.P.S. (Auto Programming System)
If you have a Video Cassette Recorder or a Satellite receiver connected to your TV please
ensure that they are switched on before automatic tuning begins. In the case of a VCR, insert
a pre-recorded tape and begin playback of your equipment. These measures ensure that all
your external equipment is tuned in during the Auto Setup procedure.
3
5
After APS is finalized, the programme table will appear on the screen. In the
programme list you will see the programme numbers and names assigned to
the programmes.
4
After process is completed, a message asking for
analogue channel search appears on the screen. To continue Auto Program,
first set the language, country and teletext language by using / button and
then press the RED or button
Automatic Search
OK
| }
For details, please refer to the section of the instruction book.Install Menu
Country
Language
UK
Ok
Cancel
PLEASE CHECKANTENNA CABLE
AUTO. PROGRAMMING SYSTEM
TXT Language
UK
P 03 - C 04
63.75 MHz
6%
63.75 MHz
Cancel
APS is running...
First time installation
Choose Country
Set country and continue installation
OK UK
Do you want to start automatic search?
Yes No
MENU
Codec 4:3
Codec 16:9
Searching UHF channels 62. Please wait. This will take a few minutes
Cancel searching
Automatic Search
When the TV is turned on for the first time, the menu for the language selection
appearsonthescreen.Themessage
is written in all language options sequentially in the menu on the screen. By
pressing or buttons highlight the language you want to set and press .
After then, willappearon screen. Bypressing or
buttons,select country itemyouwanttosetandpress button.
“Welcomepleaseselectyourlanguage!”
OK
First timeInstallationMenu
OK
After the First Time Installation is set, the following message appears on the
screen.
To start automatic search, select to cancel select This process will
takeaboutfive minutes.Tocancel searching,you canpress“ ”buttonat anytime
duringtheprocess.
“Yes”, “No”.
1
2
Downloaded From TV-Manual.com Manuals