Filter
Top Products
-19-
Up to five separ ate timer events can be set an d each
is displayed i n the Timer screen, s howing the event
number, the channel to beselected, the start time, end
time, date and the mode - whether that event is active
(and will be acted on) or not.
S
ELECT
i
MENU
TIMER MENU
No Channel Name Start End Date Mo de
1. ITV1 2 0:00 21:00 12/05/2005 Active
2. BBCONE 00:00 00:00 01/01/2005 Inactive
3. BBCONE 00:00 00:00 01/01/2005 Inactive
4. BBCONE 00:00 00:00 01/01/2005 Inactive
5. BBCONE 00:00 00:00 01/01/2005 Inactive
6. BBCONE 00:00 00:00 01/01/2005 Inactive
ToggleMode Exit Edit Timer More
• To set an event, highlight its mode button using the
a
/
b
button and press the OK button to displa y
the timer en tr y window.
N
ame:
Start:
End:
Date:
Mode:
3. ITV 1
00:00
00:00
03/06/2005
Once
• Here the five settings of c hannel name, start time,
end time, date and frequency mode can be set. Y ou
can move freely between each setting using the
a
/
b
buttons.
• The channel name is set using the
_ /
`
button to
display the channel which broadcas ts the
programme.
• The start time, end time and date are each set with
the digit buttons on the remote control in 24-hour
format.
• The frequency mode determines how often the
receiver operates this event and is set with the
_
/
`
button to be either Onc e, Daily,orWeekly.
If an inva lid number for the start or end times or the
date is entered, “Entered time is not valid” message
appears on the menu.
If timer action occurs while the TV is watched, the TV
switches to the selected channel. When timer ex-
pires, the TV s witc hes to the channel which it is
switched from.
Selected digital channel will be output via Scart-2.
You should connect your VCR to Scart-2 for record-
ing digital broadcast.
Recording FromIDTV
Connect your VCR toAV-2 vi a a scar t lead.
Set the AV-2 OUT in the feature menu to DDT, as
i l l us t ra t ed an d des c ri bed on page24.
Set the time as described above.
Set your TV to standby using the remote control.
Set your VCR to correspond with the time set on your
TV and select ex ternal input (refer to your VCR in-
struction b ook).
NB. If you switch on your TV whilst the timer record-
ing is active and then switch back to standby, the
timer recording will be cancelled; the timer setting will
be deleted and the desired programme will not be
recorded.
Language
Some programmes are broadcast in two or more lan-
guages simultaneously. The language heard can be
selected from the Language Menu.
•Pressthe
button to display the M ain Menu and
use
a
/
b
button to highlight the Language line and
press the OK button.
Main Menu
Channel List
Installation
Configuration
Timers
Language
TV Setup
Common Interface
•Usethe
a
/
b
button to highlight the soundtrack
language required and press the OKbutton. Normal
viewing, with the required language soundtrack, can
be resumed by pressing the
button.
Languages
English
Downloaded From TV-Manual.com Manuals