Hitachi L37VP01E TV Antenna User Manual


 
English - 18 -
Manual Search:
In Manual Search, the number of the multiplex is
entered manually and only that multiplex is searched
for the channels. For every valid channel number,
signal level, signal quality and network name are
shown at the bottom of the screen.
In both manual and auto search any existing channel
in the database is not re-stored to avoid redundant
duplicates of that channel.
First Time Installation
The user can use this item to load default settings,
which had been loaded to the receiver at the factory.
To install factory settings, highlight First Time In-
stallation menu item and press OK button, then you
will be asked to tings. Selecting Yes by pressing OK
button while the Yes is highlighted and then the
existing channel table will be deleted.
After factory settings is loaded, First Time Instal-
lation menu will be displayed.
The menu which is displayed for language selection
appears on the screen at first. By using
or
buttons, select the desired language option, and press
OK button to activate.
After the language is selected, a message asking for
automatic search start appears on the screen.
Highlight Yes item by pressing or buttons and
press OK button to start installation. After search is
completed for digital channels, a message asking
search for analogue channels appears on the screen.
Highlight Yes item by pressing or buttons and
press OK button to searh for analogue channels.The
following menu appears on the screen for analogue
channel search.
By pressing or button, adjust the Country item
and press
to highlight Language item. Use or
button to set Language. Use or buttons to
select TXT Language and set it by using
or
buttons. Press OK button to continue.
Configuration
Press button to display the Main Menu and the
button twice to highlight Configuration, then press OK
button to display the Configuration menu. Press
button to exit the menu.
0DLQ0HQX
The various configuration functions are displayed in
a list, along with a quarter-screen image of the cur-
rently selected channel. You can select a function by
highlighting the corresponding menu line using the
or buttons.
Downloaded From TV-Manual.com Manuals