Filter
Top Products
English - 23 -
balance
By pressing
a
/
b
button, select Balance. Press
`
button to increase balance to the right. Press
_
button to decrease balance to the left. Balance level
can be adjusted between -32 and +32.
Press the
button to return to the previous menu.
Sound Mode
By pressing
a
/
b
select Sound Mode. Press
_
/
`
button, you can select Mono, Stereo, Dual I or Dual II
mode, only if the selected channel supports that mode.
AVL
By pressing
a
/
b
select AVL. Press
_
/
`
button to
set the AVL as on or off.
Effect
By pressing
a
/
b
select Effect. Press
`
button to
set Effect as on or off.
Dynamic Bass
Dynamic Bass is used to increase bass effect of
the TV set.
By pressing
a
/
b
button, select Dynamic Bass. By
pressing
_
/
`
button set Dynamic bass to Low, High
or Off. It is not recommended to select High if listening
at high volume levels.
3DS
By pressing
a
/
b
button select 3DS. Press
_
/
`
button to set 3DS as on or off.
SubWoofer
It is possible to connect an external, active subwoofer
to the set to give a much deeper bass effect.
By pressing
a
/
b
button, select Subwoofer.
Subwoofer can be set to On or Off.
Dynamic Bass is not available if Subwoofer is set to
On. Set Subwoofer to On when you connect an ex-
ternal subwoofer to the set.
Store
By pressing
a
/
b
button select Store.
Press
`
or OK button to store the adjustments.
Stored will be displayed on the screen.
Feature Menu
Sleep Timer
By pressing
a
/
b
select Sleep Timer. Press
_
/
`
button to set the Sleep Timer.
The timer can be programmed between Off and 120
minutes in steps of 10 minutes.
Child Lock
By pressing
a
/
b
select Child Lock.
Press
_
/
`
button to set the Child Lock on or off.When
on is selected, the TV can only be controlled by the
remote control handset. In this case the control panel
buttons will not work (except for the STANDBY but-
ton). Hence, if one of these buttons is pressed, Child
Lock On will be displayed on the screen when the
Menu screen is not visible.
Language
By pressing
a
/
b
button, select Language.Use
_
/
`
button to select the language.
Available language options are; English, German,
French, Turkish, Spanish, Danish, Swedish, Dutch,
Italian, Greek, Portuguese, Norwegian, Finnish, Pol-
ish, Czech, Hungarian, Russian, Slovak, Slovenian,
Rumanian, Bulgarian, Croatian, Serbian.
AV-2 Out
By pressing
a
/
b
select AV-2 Output. Use
_
/
`
button, to set Ext-2 Out to TV/DTT, AV-1, AV-3, AV-4,
HDMI-1, HDMI-2 or PC RGB.
NOTE: Only audio output is available for AV-3,
AV-6, AV-7 and PC RGB. The other options have both
audio and video outputs.
If currently watched source is analogue TV, a con-
nected device displays analogue TV source as well.
If this source is set to digital mode, connected de-
vice displays digital source. In order to avail this
function, AV-2 Out should be set to TV/DTT.
Downloaded From TV-Manual.com Manuals