Hitachi L40A105A Flat Panel Television User Manual


 
21
ENGLISH
Time Shift
You can record a digital program by using the USB memory
drive. This function is for your convenience, and allows you
to pause/record a live program for a period of time based on
the size of the USB drive inserted.
Note: The connected USB device must;
Have a minimum approx. 100 MB of memory (32 GB max.).
Formatted as FAT16/32.
Have a write speed higher than 40Mb/sec.
Contain no other files.
Do not use USB extension cable.
Preparation:
Plug-in an external storage device into USB port.
To start recording, press
(PAUSE). The recording will start and
the picture will be paused.
To view a live program, press (STOP). The paused picture
goes back to a live program and recording continues.
To stop recording, press (STOP) again during viewing a live
program with recording.
To start playback, press
(PLAY). The recorded program starts
playback.
If you want to watch the program while recording, press
(PLAY).
You can watch the recorded program while recording the current
program.
To pause the playback picture, press
(PAUSE).
To stop the playback, press
(STOP).
To fast forward or fast reverse, press (SKIP–) or (SKIP+).
USB status display
Press DISPLAY while watching a DTV channel, or press the Time
Shift operation buttons. The status display will appear.
USB Memory Information
Delay Time : 00:02:09
Message: Now Play View
Playback status :
(PLAY),
(STOP),
(PAUSE),
(SKIP+),
(SKIP-)
Recording
Delayed time from the current program
or Playing time in the play mode.
If there are no recorded program in
the USB memory, --:--:-- will appear
Message display
Now Live View... Viewing live program
Now Play View... Viewing recorded program
Now Pause View... Pausing the program
Not Available... Inhibited function
USB Memory is full...Caution of available USB memory
less than 100MB (Insufficient USB free space...will show
when (PAUSE) is pressed.
No Data... When you press
(PLAY) and there are no
data recorded in the USB memory
USB Memory is unplugged... USB memory is not connected
To delete the recorded program
Disconnect the USB memory, record another program, or turn off
the TV.
Note:
Time shift does not work for ATV or external inputs. If you change the
signal while recording a program (Live View), recording will stop.
During Play view mode, ATV channel select or input select will not work.
Time shift recordable time is approximately 10 minutes per 1 GB for HD
or 30 minutes for SD (depending on the programs).
You cannot watch the recorded program on a PC or other device.
All of the USB memory may not able to be used.
We will accept no responsibility whatsoever for loss of files on USB
devices caused by connection to this unit.
3IM0821B_En.indd 213IM0821B_En.indd 21 11/29/11 10:06:06 AM11/29/11 10:06:06 AM