Filter
Top Products
32
Reset
This function allows you to reset the Video Menu Settings of the
present input source and return it to the Standard video mode
Video
Audio
Setup
Channels
Multimedia
MPEG NR Off
Gamma 2
Auto
Mid
Auto
20
Gamma
Backlight
Auto Movie
Reel120 Motion
Aspect Ratio
Reset
Move SelectSEL Return ExitEXIT
1. Use the CURSOR PAD , to highlight this function.
2. Press the SELECT button or CURSOR PAD to select
Yes or No.
3. Press the SELECT button on the Yes option to execute the
reset of the Video settings.
Depending upon the video program being viewed, you can
customize each video input to your preference to increase viewing
performance and pleasure.
If you run this Reset menu, only the present input source will reset
to its initial condition. For example, if the Reset menu has been
selected and done for HDMI 1 input source, only the HDMI 1
settings will return to its factory default.
Video
Aspect Ratio reference
Input Signal Display Screen
Display Aspect
Recomended
To display suitable screen as follows.
When Watching Standard Definition Pictures:
(4:3 Signal)
4:3
Displays 4:3 programs in there original aspect ratio with bars to
the left and right of the image.
Expands a 4:3 aspect ratio program to fill the widescreen 16:9 screen
(Vista)
Zoom1
Use this aspect mode to expand letterbox movies to fill the screen.
Note that some of the image may not be visible.
(Cinema)
Zoom2
Use this aspect mode to fill the screen with very widescreen
movies. Note that some of the image may not be viewable in
this mode.
When Watching High Definition Pictures:
(16:9 Signal)
16:9
Plays a 16:9 image faithfully showing 95% of the size.
Full
Use this mode when you want to see 100% of the signal.
Note that some signals have noise. In the case of noise use the 16:9
mode.
16:9