Filter
Top Products
Basic Operations (VCR Plus + Recording)
40
4. Repeat step 3 for all channels that need to be assigned.
5. Press GUIDE to end the setup procedure. You are ready to begin delayed recording
with VCR Plus+.
Cable with a Cable Box or Cable with a Cable Box and Splitter Setup
Use this setup procedure if you receive all channels through a cable box. CABLE BOX
SET tells the VCR how to record or to view programs from the cable box. If your cable
box can be controlled by a remote, the VCR may be able to tune it to the channel you
want to record or view. Before you begin, you need to know the output channel for your
cable box. Usually this is either 03 or 04, but it could be 02 through 13. Consult your
cable company if you're not sure.
1. Connect the Cable Box, VCR and TV. See page 50.
2. Press GUIDE, then press 5 to select "INITIAL SETUP MENU".
3. Press 1 to select CATV2 with the ANT/CATV1/CATV2 setting, then press 7 to select
"CABLE BOX SET" menu.
4. Press 2 to answer "YES" to the question "Is a cable box being used with the VCR for
all channels?" You will then see this screen:
5. Turn on your cable box and tune it to channel 02.
6. Enter the output channel of your cable box by pressing a number on the remote. For
example, press 0 3 for channel 3.
7. Press GUIDE to enter the output channel of your cable box. You will then see this
screen.