Filter
Top Products
Basic Operations (VCR Plus + Recording)
50
entries.
If none of the codes work, press GUIDE several times to quit. The VCR will not control
your cable box. However, the output channel of the cable box has been set. Turn on the
cable box and leave it tuned to the channel you want to record some time before the
recording is to begin.
Using VCR Plus+ to Record a Program
Now that your channels are set up, you can take advantage of this quick and easy
method of delayed recording. You will use the on-screen Easy Guide System, following
the basic procedure for delayed recording outlined on page 40. See the section on
Recording a Program for recording tips and programming priorities.
You set up the delayed recording using the on-screen Easy Guide System.
1. Press GUIDE, then press 1 to select VCR PLUS RECORDING and bring up this
screen:
2. Use the number buttons to enter the PlusCode of the program you want to record.
This code can be up to eight digits. If you enter a wrong digit, press CLEAR and enter
the correct one.
3. If you accidentally enter a nonexistent PlusCode, the VCR gives you an error
message that disappears from the screen in about 10 seconds.