Filter
Top Products
Basic Operations
32
At the point that you want to go back to, press CLEAR on the remote control. This
resets the counter to 0:00:00.
Press STOP when you are done recording or playing back the tape.
Press DISPLAY again and "M" will display below the counter on the TV screen. This
indicates that the counter's memory function is engaged. The counter also appears on
the VCR's display.
Now when you rewind the tape, it will automatically stop at the spot where you cleared
the counter. (Notice it moves just past the marker and then back to it.) Press PLAY to
watch the tape from that preselected spot.
Press DISPLAY to take the counter display off. The spot is still in memory until you
set a new one or until the tape is ejected.