Filter
Top Products
Basic Operations (VCR Plus + Recording)
44
4. If you have entered the correct PlusCode, press GUIDE to store the PlusCode in the
VCR's memory. This brings up another screen:
5. Press number buttons 1, 2, or 3 to select ONE TIME, DAILY, or WEEKLY
RECORDING.
Important: Programming does not take effect unless you select one of these options.
6. When the next screen comes up, choose between standard or extended tape speed
by pressing the TAPE SPEED button. This is also a good time to check the channel
number-- it should be the one on which you usually watch the program at home. (If not,
you need to check your VCR Plus+ channel setup.)
Remember, if you are recording through a cable box, the screen will show the channel
as 03 or 04. You also need to manually select the channel you wish to record on.
7. Review the screen to be sure everything is set as you want, then press GUIDE to
complete your programming or continue with additional programs.
When you have set up all the timed recordings you want:
Don't forget to load a videocassette (with the safety tab still attached) to record on.
If you have a cable box hookup with an A-or-B switchbox, set the switchbox to the
proper connection for the programs you are recording (through the cable box for
scrambled premium channels, direct cable for all other channels).
Important: Your timed recording settings take effect when you turn off the power on the