Hitachi VTMX-231A VCR User Manual


 
PREPARATION FOR USE
18
• If "TUNER SET UP" appears on the TV screen again, check the cable connections. Then, press MENU, F.FWD/ or
REW/
button once again. The VCR will begin preset again.
TO SELECT A DESIRED CHANNEL
You can select the desired channel by using CHANNEL (CH) or button or directly pressing number buttons on the
remote control.
Note for using number buttons:
When selecting cable channels which are higher than 99, press +100 button first, then press the last two digits. (To select
channel 125, first press "+100" button then press "2" and "5").
• You must precede single-digit channel numbers with a zero (For example: 02, 03, 04 and so on).
CLOCK SET UP
Set the clock accurately for proper automatic timer recording. We suggest that you use a TV or radio station as your time
source.
In the example below, the clock is to be set to:
DATE March 1st, 1997
SETTING TIME 5:40PM
Use the remote control for this procedure.
• When in the Menu mode the following buttons only
work (PLAY/ , F.FWD/ , REW/ , STOP/ , RESET/EXIT,
POWER and MENU).VCR power must be turned on.
• The "PWR." and the "VCR" indicator must appear on the VCR's digital display.
• Turn on the TV and set the TV to channel 3 or 4. Now set CH3/CH4 switch on the back of the VCR to match the channel
selected on the TV.
FOLIOHG2
<IMG SRC="ObjE55.BMP">
1 Select "SETTING CLOCK"
Press MENU button. The SETTING CLOCK menu appears.
SETTING CLOCK
MONTH DAY YEAR
- - / - - - - - -
HOUR MINUTE AM/PM
- - : - - - -
• The number buttons on the remote control do not work in this Menu mode.
• When you press F.FWD/
button during steps [2] to [6], you may forward to next step.
• Press REW/
button to go back one step from current step during steps [3] to [7].
2 Select the month
Press /PLAY or /STOP button repeatedly until your desired month appears. (Example: March 03)
Then, press F.FWD/
button.