Filter
Top Products
39
Remote Control Illustration.
10 Press the TAPE SPEED button to select the recording speed EP.
............................................................................................................................................................
11 Press the PROGRAM button to set the program in memory.
............................................................................................................................................................
12 Press the POWER button to turn off the VCR.
The TIMER (delayed recording) indicator will display on the VCR.
This tells you that the VCR will automatically record at the times and dates you have programmed.
Note: If a cassette has not been inserted or a cassette without safety tab has been inserted, the delayed
recording indictor will flash to warn you. The cassette without safety tab will be ejected automatically. Be sure to
insert a cassette with safety tab intact.
............................................................................................................................................................
When you have set up all the timed recordings you want:
• Don't forget to load a videocassette (with the safety tab still attached) to record on.
• If you have installed a cable box on the cable box and select the channel you want to
record on the cable box (08 in this case) before recording starts.
Note: You can correct any item entered as you go by pressing the CLEAR button repeatedly until the digit to be
corrected changes to white dash "-" on the screen. Then enter the correct number. Illogical times and dates won't
be accepted.
To stop recording while in the timed recording mode:
1 Press POWER button.
2 Press the STOP button within 10 seconds.
• This can be done either on the VCR or with the remote control.
Remote Control Illustration.