Filter
Top Products
28
• When a blank is detected, the tape will automatically rewind to the beginning of the blank.
Notes:
• When a cassette without a safety tab is inserted, the cassette will be ejected automatically.
• Tape bar will not appear correctly if tapes which have scratches or are slack are being used.
When the beginning of blank is located, the STOP screen will appear for five seconds and the tape will stop.
• The tape remaining time appears in the VCR display.
Note: Make sure that the tape is at the beginning of blank before you start recording or editing.
• Switching rewind or fast forward to visual search (EASY VIEW)
Hold down the (VIEW/SKIP/BLANK) button during rewind (or fast forward), and the mode will switch to
visual search, so that you can search for a scene you want to view while scanning pictures.
Hold down the
(VIEW/SKIP/BLANK) button during rewind:
The tape will be visually scanned in the reverse direction while the button is held.
Hold down the (VIEW/SKIP/BLANK) button during fast forward:
The tape will be visually scanned in the forward direction while the button is held.
• When the button is released, the tape will rewind or fast forward again.