Filter
Top Products
REMOTE OPERATION - 11 -
Hold for 10 Seconds
2 Install batteries.
• Align the positive (+) and negative (-) polarity marks on the batteries with those indicated on
the remote control.
3 Replace the lid.
Operating in the remote control
Operating the VCR:
1 Make sure there is no obstacle between the remote control and VCR's infrared receiver.
Note: You cannot operate the VCR if there is an obstacle (for example, coffee table, sofa, etc) between the VCR
and remote control.
2 Point the remote control at the VCR's infrared receiver and press the required button
on the remote control.
Note: If the remote does not work even at close range, try replacing the batteries with two fresh "AA" batteries.