Filter
Top Products
EASY DELAYED RECORDING WITH THE VCR PLUS+ SYSTEM - 63 -
Note: If you accidentally enter a nonexistent PlusCode number, the VCR gives you an error message that
disappears from the screen in about 10 seconds.
5 Press the
or cursor button to select ONE TIME, DAILY or WEEKLY PROGRAM, and then press
ENTER button.
Note: Programming does not take effect unless you select one of these options.
6 Press the
cursor button to select tape speed, and then press the or cursor button or TAPE
SPEED to choose recording speed SP (standard play) or EP (extended play).
The screen will display all the details of the program you chose. Check the CH number to make sure it is the right
one.
If not, you need to check your VCR Plus+ channel setup again.
• If you have installed a cable box (see page 23), the cable box output will appear in the CH column.
7 Review the screen to be sure everything is set as you want, then press the PROGRAM button to
complete your programming or continue with additional programs.