Hitachi VT-FX795A VCR User Manual


 
4 EN
1
Select main menu by pressing [MENU].(If the
clock is not set, the CLOCK SET menu appears
first. In this case, follow step [3].)
2
Select "CLOCK SET" by pressing [PLAY] or
[STOP]. Then, press [F.FWD].
3
Set the clock.
To go back one step, press [REW].
4
Start the clock by pressing [COUNTER RESET/EXIT]
or [F.FWD].
1
Press [MENU] until the main menu appears.
2
Select "LANGUAGE SELECT" by pressing
[PLAY] or [STOP].Then, press [F.FWD].
3
Select "ENGLISH" , "FRANCAIS" or
"ESPAÑOL" by pressing [PLAY] or [STOP].
Then, press [COUNTER RESET/EXIT].
If you accidentally select Spanish or French and
need English: Press [MENU] and choose SELEC.
IDIOMA, or SELECTION LANGUE. Press
[F.FWD], and select ENGLISH. Finally, press
[COUNTER RESET/EXIT].
To Change the On-Screen Language
Clock Set Up
PLAYBACK FUNCTION
Normal Playback
When the VCR automatically programs the tuner to scan
only the channels you receive in your area, some chan-
nels may be skipped due to weak signal.You can manual-
ly add the channel in the VCR memory.
1
Press [MENU] until the main
menu appears.
2
Select "CHANNEL SET UP" by
pressing [PLAY] or [STOP].
Then, press [F.FWD].
3
Select "MANUAL SET UP" by pressing [PLAY]
or [STOP]. Then, press [F.FWD].
4
Enter the desired channel number by pressing
[PLAY] or [STOP].
5
Add or Delete it from memory by pressing
[F.FWD] or [REW] so that "ADD" or "DELETE"
flashes on the TV screen accordingly.
6
Exit the Preset mode by pressing [COUNTER
RESET/EXIT].
To Add/Delete Channels
1
Insert the prerecorded tape. The VCR will turn
on. If the safety tab has been
removed, the VCR will start playback
automatically.
2
Turn on the TV and set the TV to channel 3. If
channel 3 is already occupied for broadcasting,
change the RF output to CH 4, and change the
TV channel to CH4. (See RF Output Channel
on page 3 for the detail.)
3
Begin playback by pressing [PLAY].
Tracking adjustment will be set automatically
(Digital Tracking function) when you start playback.
To adjust the tracking manually, press
[CHANNEL ]
on the VCR.
You cannot manually adjust the tracking of a Still
picture. However, you may press [CHANNEL ]
on the VCR to remove vertical jitter in a Still picture.
When a tape has reached the end, the VCR will
rewind the tape to the beginning, eject the tape,
and turn off the VCR automatically.
S-VHS Quasi Playback (SQPB): This unit allows you
to view a tape recorded in S-VHS format. (Noise lines
may appear on the picture.)
(
)
(
)
CLOCK SET
MONTH DAY YEAR
03 / 17 MON 2003
HOUR MINUTE AM/PM
05 : 40 PM AM
PM
Press [PLAY] or [STOP]repeatedly.
Then, press [F.FWD].
Press [PLAY] or [STOP] repeatedly.
Then, press [F.FWD].
The day of the week will appear automatically.
Press [PLAY] or [STOP] repeatedly.
Then, press [F.FWD].
Press [PLAY] or [STOP] repeatedly.
Then, press [F.FWD].
Press [PLAY] or [STOP]
repeatedly.
Press [PLAY] or [STOP] repeatedly.
Then, press [F.FWD].
Set the month
Set the day
Set the year
Set the hour
Set the minute
Set the AM
or PM
- MENU -
TIMER PROGRAMMING
AUTO REPEAT
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
AUDIO OUT
TV STEREO
SAP
[OFF]
[ON]
4
To stop playback, press [STOP].
You can reset the counter by pressing [COUNTER
RESET/EXIT] on the remote control
You can freeze the picture on TV screen by pressing
[PAUSE] during playback.
You can advance the picture by one frame at a time
by pressing [PAUSE] during the still mode.
If the picture begins to vibrate vertically during the
still mode, stabilize the picture by pressing
[CH ].
If the picture is distorted or rolling vertically, adjust
the vertical hold control on your TV, if equipped.
You can see the slow motion by pressing [SLOW]
during playback or the still mode.
If the noise bar appears on the TV screen, you can
reduce it by pressing [CH ].
After the VCR has been in Still/Slow mode for 5 min-
utes, it will stop automatically to protect the tape and
the video head from damage.
To return playback, press [PLAY].
(
)
(
)
Still / Slow
Counter Reset