Hitachi VT-FX795A VCR User Manual


 
6 EN
If there is a power failure or the VCR is unplugged for
more than 30 seconds, the clock setting and all timer
settings will be lost.
If the tape runs out before the end time, the VCR will
switch to the Stop mode immediately, eject the tape
and the VCR power will be turned off.The TIMER
indicator will flash.
If a tape is not in the VCR or does not have the safety
tab, the TIMER indicator flashes and timer recording
cannot be performed. Please insert a recordable
tape.
Press [STOP/EJECT]
on the VCR.
1
Turn the power on by pressing [POWER].
2
Select main menu by pressing [MENU].
3
Select "TIMER PROGRAMMING" by pressing
[PLAY] or [STOP].Then, press [F.FWD].
4
Select the program number which you want
to check by pressing [PLAY] or [STOP]. The
details of the selected program appears on the
TV screen.
Go to the digit you want to change by pressing
[F.FWD] or [REW].Then, enter correct numbers by
pressing [PLAY] or [STOP].
You may cancel the entire program by pressing
[REW] during the program number flashes.
5
Press [COUNTER RESET/EXIT] to exit.
6
Press [POWER] to return to timer stand-by
mode.
To Check, Correct, or Cancel an Automatic Timer Program
To Stop an Automatic Timer Program already started
Hints for Timer Recording
You may set the VCR to start recording while you are
away.You can set eight programs to record on specific
days, daily or weekly within a 1 year period.
1
Insert a tape with its safety tab into the VCR.
2
Select main menu by pressing [MENU].
3
Select "TIMER PROGRAMMING" by pressing
[PLAY] or [STOP].Then, press [F.FWD].
If you have not yet set the clock, "CLOCK SET"
appears. If so, continue with the step [3] in "CLOCK
SET UP" section. Then, set the timer recording.
4
Set the timer.
TIMER RECORDING
Select once, daily or weekly recording
Set the tape speed
Set the channel number
Set the end time
Set the start time
Set the date
Set the program number (1~8)
Press [PLAY] or [STOP] repeatedly for the desired channel number.
Then, press [F.FWD].
If you connected the VCR to a cable box or satellite box as in "Connect
VCR to TV" on page 3, select the VCR to channel 3 or 4 the same channel
as RF output channel of the VCR.
Then, select the channel you want to record at the cable box or satellite box.
Leave the cable box or satellite box on for timer recording.
Press [PLAY] or [STOP] repeatedly for the
desired
tape speed.
Then, press [F.FWD].
Program number which is not set up flashes.
Press [PLAY] or [STOP] repeatedly for the
desired program number.Then, press [F.FWD].
First, press [PLAY] or [STOP] for the month. Then, press [F.FWD].
Next, press [PLAY] or [STOP] for the day. Then, press [F.FWD].
First, press [PLAY] or [STOP] for the hour. Then, press [F.FWD].
Next, press [PLAY] or [STOP] for the minute. Then, press [F.FWD]
.
And then, press [PLAY] or [STOP] for AM or PM. Then, press [F.FWD]
.
Follow the instructions of "Set the start time" to set the end time.
For weekly:
Press [PLAY] or [STOP] to point to
"WEEKLY".
Then, press [F.FWD]
.
For daily (Monday~Friday):
Press [PLAY] or
[STOP] to point to "DAILY".
PROGRAM NUMBER 4
ONCE
DAILY
WEEKLY
ONE TIME PROGRAM
PROGRAM NUMBER 4
DATE 05/12 MON
START TIME 07:30 PM
END TIME 08:30 PM
CHANNEL 16
REC SPEED SP
SP
SLP
PROGRAM NUMBER 4
DATE - - / - -
START TIME - - : - - - -
END TIME - - : - - - -
CHANNEL - -
REC SPEED - -
For once:
Press [PLAY] or [STOP] to point to "ONCE".
• To go back one step, press [REW].
5
To set another program, repeat step [4].To exit, press
[COUNTER RESET/EXIT].
6
Press [POWER] to set the timer. The TIMER indicator
on the VCR comes on.
TIMER RECORDING WILL
NOT BE ACTIVATED UNLESS YOU TURN THE VCR
OFF.
Use this feature to memorize the beginning of record-
ing start point.
1
Press [COUNTER RESET/EXIT]
on the remote control to reset
the counter.
2
Press [COUNTER MEMORY] on
the remote control so that M
appears on the TV screen.
3
Record the program.
4
After recording, press [STOP] then [REW].
When 0:00:00is reached, rewinding operation goes to
stop. And you can view the recording program.
[COUNTER MEMORY] does not function if the Auto
repeat mode is set to [ON]. In this case, set the Auto
repeat mode to [OFF].
To cancel the Counter memory mode, press [COUNTER
MEMORY] so that Mdisappears from the TV screen.
Counter Memory Function
REC
SP M0:00:00M0:00:00