Filter
Top Products
5. Use the template in Figure 1 or the locking plate as a guide to drill three
#39 pilot holes in the mounting surface.
6. Secure the locking plate to the wall with the three #7 wood screws ()
provided in the kit.
Figure 5
7. Position the unit so the base plate sits flush over the locking plate.
Twist the unit 90° counter-clockwise to lock the unit into place.
Figure 6
Locking Plate Drill Template – Kit 46-00911
Figure 7
A = #39 Drill, 3 Places
- 3 -