Honeywell DR4300 DVR User Manual


 
Appendix C - Setpoint Ramp/Soak
Programming and Operation
12/03 DR4300 Circular Chart Recorder Product Manual 223
Function Press Result
Viewing the Number of
Cycles Left for the
Program
until you see
input value
REC.X
Number of cycles remaining in the
setpoint program
X = 0 to 99
Ending the Program
When the final segment is completed, the “RUN” in the
lower display either changes to “HOLD” (if configured for
HOLD state), or disappears (if configured for disable of
setpoint programming).
The recorder will operate at the last setpoint achieved by
the program.
Disable Program
until you see
until you see
or
until you see
Exit configuration and program is disabled.