Filter
Top Products
Honeywell
127
Network
The network interface is shown as in Figure 6-33.
Figure 6-33 The Network Setup Menu
Please refer to the following sheet for detailed information.
Parameter Function
Ethernet Please select the network card first.
DHCP
Dynamically get IP address. You can get the device
IP from the DHCP server if you enabled this function.
TCP Port Default value is 37777.
HTTP Port Default value is 80.
Max Connection
Network user max amount. The value ranges from 0
to 10.
0 means there is no user can access current device.
Remote
Host
PPPOE
Input the PPPoE user name and password you get
from the IPS (internet service provider) and enable
PPPoE function. Please save current setup and then
reboot the device to get the setup activated.