Filter
Top Products
2007 Retail Catalog
www.hosatech.com
5
Toll-Free Phone (877) 736-9270 Toll-Free Fax (800) 522-4542 M thru F, 8am to 5pm, Pacific
VCT 377 ..$110.00
CBT 375 ..$130.00
HEM 462 ..$127.00 HEM 331 ..$115.00
SLW 333 ..$150.00 MVS 413 ..$150.00
AUDIO SWITCHERS
Noiseless BALANCED 3-IN, 1-OUT switching (or vice-versa) in
left / right pairs. Great for selecting among multiple powered
monitor speakers. Does not require power. For line-level
only. Not for after amp speaker connections.
Noiseless BALANCED 1-IN, 2-OUT switching IN STEREO.
Perfect for selecting between two sets of powered monitor
speakers. Features Independent Volume controls for each
output, plus master Mute Button. Does not require power. For
line-level only. Not for after amp speaker connections.
Audio Signal Selector
AUDIO SWITCHERS
Audio Signal Selector With Volume and Mute
Hum Eliminator
Two channel Hum Eliminator is designed to get rid of “ground
loop” problems, such as AC hum or buzz and / or pop noises.
Use it to convert between balanced and unbalanced lines.
Two channel Hum Eliminator is designed to get rid of “ground
loop” problems, such as AC hum or buzz and / or pop noises.
Use it to convert between balanced and unbalanced lines.
Works in either direction.
Hum Eliminator for PC Audio Integration
Video Cable Tester Cable Tester
Tests: RCA, 1/4”, 3.5 mm, XLR, Speakon and Banana Tests: RCA, BNC, “F”, and S-Video!
Computer
Sound Buzzing
and Humming?
2 UNBAL. 1/4” INPUTS
2 BALANCED 1/4”
OUTPUTS
GROUND LIFT
SWITCHES
PASSIVE CIRCUITRY
WITH TRANSFORMER
NO BATTERY
REQUIRED
CONVERTS UNBAL. to
BALANCED
2 UNBAL. RCA INPUTS
2 BALANCED XLR (M)
OUTPUTS
GROUND LIFT SWITCHES
PAD IN/OUT SELECTOR
SWITCH
STEREO/MONO SWITCH
ALLOWS COMBINING
OUTPUTS
PASSIVE CIRCUITRY WITH
TRANSFORMER
NO BATTERIES REQUIRED
XLR OUTS
ON REAR
MODEL MSRP MODEL MSRP
MODEL MSRP MODEL MSRP
MODEL MSRP MODEL MSRP
Signal Switchers / Hum Eliminator / Cable Testers
One button automatic audio cable tester. Just plug in your
cables, press the button and the readout will tell you if your
cable is good or bad.
One button automatic video cable tester. Designed specifically
for video applications. Just plug in your cables, press the but-
ton and the readout will tell you if your cable is good or bad.