Filter
Top Products
1.3 Specifications
Operation System: Integrated preprogrammed & learning
infra-red remote control system
Compatibility: Preprogrammed with code library of
Televisions (TVs), Video Cassette
Recorders (VCRs), Satellite / Digital
Satellite Receivers (SATs), Cable
Converters (CTVs) and Digital Video
Disc Players (DVDs)
Memory Capacity: 120 learning commands
Memory Retention
after Battery
Disconnection: Non-volatile and permanent memory
Display Panel: Monochrome touch screen LCD
EL Backlighting: Blue-Green EL backlit
Operating Distance: 8 metres (25 feet)
Power Requirement: 4 x AAA size batteries (Alkaline is
recommended)
Dimensions: 154 x 52 x 23 mm
Weight : 100g (without batteries installed)
140g (with batteries installed)
For improvement purposes, specifications and functions are subjected
to change without priority notice.
1.4 How to Install Batteries
Note: Battery Low
If the icon “ ” is shown on the display panel, it shows
that the battery level is low. You must replace the battery
with the new one to ensure proper functioning. Do not use
old and new batteries together as old batteries tend to leak.
Alkaline batteries are recommended.
1. Open the battery cover.
2. Follow the polarity symbol shown in the battery
compartment.
3. Place the batteries inside.
4. Replace the battery cover.
3 4
❑ After installed batteries, your HTMR prompts at TV mode. If
it is inactive for about 4 seconds, it goes to power saving
(sleep) mode and shut down the display. Simply, touch the
screen panel to activate the unit again.
Note: When in power saving (sleep) mode, the hard key
section is still available for command.
❑ Tap any of the Device Mode Key on the screen to enter the
corresponding device mode. e.g. . The “ ” icon will
flash.
❑ Tap a key directly to send out the corresponding infra-red
command.
Getting Start
2
TV
2.1 Hard Keys
There are 5 hard keys, it transmits IR command corres-
ponding to the device selected.
•
Power ON/OFF
• CH
+
Program up or channel up
• CH
–
Program down or channel down
•
VOL
+
Volume up
•
VOL
– Volume down
2.2 Key Tone
When you tap any key, there is a short beep sound.
2.3 Backlit
Blue-Green EL Backlit will be turned on once you tap the
remote. The backlit will be turned off automatically if the
remote is not active for 4 seconds.