Filter
Top Products
E23
In the bottom of found service picture, network, the information of
transponder and the number of found service that the services
belong to are displayed.
The deleted service by the Red( )button is excepted from
counting of the number of services.
The deleted service is not included in this number.
“Free” applies to the empty space of the memory.
It will be used to store future services.
In order to set the frequency range to seek, set the frequency which
the automatic service serch starts from.
In order to set the frequency range to seek, set the frequency which
the automatic service search ends to.
Set the Symbol Rate of cable signal you want to find.
Select the constellation of the cable signal you want to find.
You can select the value of 16, 32, 64, 128, 256-QAM or Auto.
Press the button anywhere to start Automatic Search.
The picture during searching is as follows.
The picture searches with varying Frequency, Symbol Rate and
FEC etc. Satellite Name is the name that the user selects to
correspond with Antenna Alternative of Antenna Setting.
The progress bar(%) appears on bottom of the picture.
During the search, services that are found are displayed as follows:
1. Press the button during Automatic Search to stop search.
2. After the search is finished, the appearite message appears.
3. Press the button to return Service Search menu.
Automatic Search
Start Frequency
End Frequency
Symbol Rate
Constellation