Humax LGB-22DRT Flat Panel Television User Manual


 
English-56
Fast Rewind to Previous Scene
Press the FAST REWIND button on the remote control to watch the scene
passed by. Each time you press the FAST REWIND button, the rewind speed
increases. ( x 2, x 4, x 16, x 32, x 64)
If you press the PLAY button, the fast rewind operation stops and the
programme is played at normal speed.
Note: You can fast rewind back to the start point. If you reach the start point
while rewinding, the programme is automatically played at normal speed from
that point.
Fast Forward to the Next Scene
Press the FAST FORWARD button on the remote control to fast forward the
programme. Each time you press the FAST FORWARD button, the speed
increases. ( x 2, x 4, x 16, x 32, x 64)
If you press the PLAY button, the fast forward operation stops and the
programme is played at normal speed.
Note: You can use the fast forward operation only when there is a time gap
between the current watching point and the broadcasting (live) point caused
by some previous operations such as pause, slow motion or fast rewind. You
can fast forward to the current broadcasting point. If the watching point reaches
the broadcasting (live) point, the programme is automatically played at normal
speed.
Recording
Press the RECORD button on the remote control to record the current
programme immediately. While the time shift operation records the programme
temporarily, this record operation records the programme permanently so you
can playback the recorded programme at any time. For more information about
recording, refer to Chapter 11. Recording and Playback > Instant Recording.
Adjusting the Recording End Time
Press the RECORD button while recording to adjust the recording end time.
<RXFDQDGMXVWWKHUHFRUGLQJHQGWLPHE\PLQXWHVXVLQJWKHŻŹEXWWRQ
and then press the OK button to change the recording end time and hide the
message screen.
Chapter 11 >> Recording and Playback