Filter
Top Products
40
5. Functions Guide
Caution: This function is for installation personnel only.
Please do not use this function, if you are not familiar with the procedures for
configuration of Set-Top Box environment.
The selected screen consists of the following 5 menus.
Each menu provides the following function.
• Select Your Signal
To check the signal reception status, complete the following procedures.
1. Press the OK( )button in the System Settings menu
2. The PIN code input window appears.
Input the configured PIN code and then press OK( )button.
3. The Channel select screen appears.
Select the appropriate Channel, and press the OK( )button.
Displays current signal status of the selected Channel by displaying signal
strength, signal quality and BER (Bit Error Rate). If the Set-Top Box is not properly
installed or there is a problem, the values displayed are very low.
6. System Settings