Humax VA-ACE Satellite TV System User Manual


 
Reference
E4
All our receivers are designed to be DiSEqC 1.0 compatible. This allows multiple antennas
to be connected to the STB simultaneously.
If you have two or more fixed antennas or LNBs, you can use a DiSEqC 1.0 switch.
1. Connect the coaxial cable from the first LNB to the LNB 1 or LNB A input connector of
the DiSEqC switch.
2. Connect the coaxial cable from the second LNB to the LNB 2 or LNB B input connector
of the DiSEqC switch.
3. Do the same for other LNBs.
4. Connect one end of a Coaxial cable to the RF output connector of the DiSEqC switch
and the other end to the LNB IN socket on the STB.
Please refer to page E33.
To the digital receiver, you can connect either a single satellite antenna directly or
through converter box several antennas or LNB of multi-feed equipment.
You can connect a further Sat-receiver(for example analogue), with the receiver of
common antenna equipment that has satellite signals.
If you have another analogue or digital STB and you wish to use the same LNB then you
can connect it via the loop through. Connect one end of a Coaxial cable to the LNB OUT
on the STB and connect the other end to the LNB IN on your second STB.
To maintain the STB up-to-date, it will be possible to upgrade the software of the STB via
satellite and personal computer. New versions of the software may include new or improved
functions for the current one. If you want to download and upgrade the software via
satellite, first of all tune your signal to ASTRA 1 Satellite. When the STB switches into
presentation from standby or you choose the STB upgrade menu, the STB detects the
new software. If the new software is available, the STB will ask you whether it downloads
the software or not. If you want to download and upgrade the software via personal
computer, visit our homepage to get more information and the new software.
(Homepage: http://www.humaxdigital.com)
1. Connect DiSEqC 1.0
2. Connect DiSEqC 1.2
3. Connect a Satellite antenna
5. Upgrade via Satellite and Personal Computer
4. Loop Through