Filter
Top Products
I
A23
0000
D
A18
G
0000
G
D
A19
A21
ON
OF
F
A22
Connect wiring from the motor to the wiring cover plate.
Reinstall the motor by inserting the tabs and pushing up
into position. Make sure the wires are not pinched between
the motor and the housing.
Secure the motor by tightening the 2 screws.
Turn on the power source.
Test the motor. If the motor does not run,
check the plug connection.
7
A20
H
Insert one spring clip of the fan cover into the slot on the
motor housing.
41717-01 05/31/2006 41717-01 05/31/2006
41717-EngS_05.31.06.indd 7 5/31/06 3:53:24 PM