Filter
Top Products
0
A17
D
A12
A13
A
A
A
Green
Black White
Bare Copper
Ground
A14
B
D
A16
F
Pull the wires through the strain relief. Tighten the strain relief screws.
Connect wires as shown.
Connect a 4” duct and vent to the outside. Tape joints.
If ducting does not fit securely, an adapter may need
to be purchased.
Install the wiring cover plate. Make sure all wiring con-
nections are inside the box or under the wiring cover plate.
6
F
A15
B
D
41717-01 05/31/2006 41717-01 05/31/2006
41717-EngS_05.31.06.indd 6 5/31/06 3:53:21 PM