Filter
Top Products
H-DVD5008-N (www.hyundai-electronics.ru) ENGLISH15
System Setup
· TEST TONE
With 5.1 operating choose On, will check 5 CHs in turn.
The checking must be done with no disc in the unit and under the condition of Downmix
being with 5.1CH. change 5.1 to OFF
Using this function can check all CHs if their linkage with sound box is correct or wrong.
· DIALOG
With Audio output mode, and choose LT/RT stereo then under the Speaker Setup Page
you can select Dialog item and adjust volumes.
While playing 5.1CH disc, can adjust speakers volumes via dialog.
· POST DRC
Dynamic compress output can lower volumes processing sound effect under the conditions of
within speakers max output. The item is divided into ON /OFF / AUTO.
SPDIF setup
· SPDIF OUTPUT
SPDIF OFF: no digital signal out (optical or coaxial output off), only analog audio output.
SPDIF RAW: no decoding on the amplifier digital signal input.
SPDIF PCM: the amplifier must be supported by PCM decoding or Dolby digital decoding
function.
· LPCM OUTPUT
Select PCM frequency at 48kHz, 96kHz or 192 kHz
Note: some amplifier don't support 96kHz or 192kHz sampling and cause optical and coaxial
output abnormal.
The initial factory setup is 48kHz.