Filter
Top Products
OWNER’S MANUAL
PC Setup
DVI Setup[Option]
• Avoid keeping a fixed image on the TV screen for a long period of time. The fixed image may become
permanently imprinted on the screen; use a screen saver when possible.
• Change the resolution of PC to displayable mode and connect to RGB1 Input (PC/DTV Input) jacks of the TV.
Tips
PC Setup
• First, turn on the PC computer and press the ON/OFF button on the TV to apply power to it. Second, turn
on the display by pressing the button on the TV or by pressing the POWER button on the TV remote
control.
• Use the TV/AV button on the remote control to select the RGB-PC input source.
• Set the resolution output of the PC to WXGA or under (1366X768, 60Hz).
• To setup this TV in your PC window environment, select Normal, Standard or Default TV. This TV does not
support Plug and Play function
• The screen does not display when the resolution is over UXGA.
• Connect the signal cable from the monitor Output port on the PC to the DVI-JN port on the Monitor.
• Connect the audio cable from the PC to the Audio ports of the TV.
• If your PC computer is equipped with a sound card, adjust the sound output on the PC.
• Select the display resolution of the PC to 1366X768 for the best picture. This TV resolution is 1366X768.
- You can easily connect the Display to your PC for outstanding image and sound.
Setup Instructions to Connect a PC to your TV