Filter
Top Products
You will need all of the following.
• Computer connected to the Internet.
• CD drive that is capable of reading and writing CD disk
• Blank CD-R or CD-RW disc.
1. Go to www.ilive.net and click on the support tab. Then select ID200B from
the list of products.
2. Select DOWNLOADS, then click on the most recent rmware update and save
le to your computer.
3. Load a blank CD into a CD writable drive.
4. Copy and Paste or Drag and Drop rmware le to CD drive, and write (burn)
le to CD.
1. Power on DVD player.
2. Press the OPEN/CLOSE button to open the DISC DRAWER. Insert the rm-
ware disc. Press the OPEN/CLOSE button to close the DISC DRAWER.
The DVD player will read disk and automatically begin update process. The up-
date process will take several minutes.
3. The DVD player will automatically power o when the update is complete.
4. Once update is complete, power on the DVD player and remove update disk.
5. Press the SETUP button to access the system setup menu.
6. Select “Default Reset” and press the ENTER button.
7. Your DVD player is now updated.
The following events may cause the writing of the rmware update to the player to be halted and the
player to no longer operate properly.
• DO NOT unplug the power cord during the rmware update process.
• Avoid loss or interruption of power during the rmware update process.
• DO NOT press the power button on the unit during the rmware update process.
• Check the rmware update disc for dirt or scratches before beginning the rmware update process.
Preparation
Creating a Firmware Disk
Installing Updates