ILO DTV2784 CRT Television User Manual


 
18
VOLUME 32
TV operation
If a channel with no broadcast is
selected, the sound will automati-
cally be muted.
If a station being viewed stops
broadcasting, the TV will automati-
cally shut itself off after 15 minutes.
To turn on the TV, press POWER.
Set the TV/CABLE menu
option to the appropriate
position (see page 16).
Adjust the volume level by pressing
VOL + or . The volume level will be
indicated on the screen by green
bars. As the volume level increases,
so do the number of bars. If the
volume decreases, the number of
green bars also decreases.
1
2
3
4
Press the Direct Channel Selection
buttons to select the channel.
TO SELECT ANALOG CHANNELS
1-9: Press 0 twice, then 1-9 as
needed. Example, to select
channel 2, press 0 0 2.
10-99: Press 0, then the remaining 2 digits. Example, to se-
lect channel 12, press 0 1 2.
100-125: Press the 3 digits in order. Example, to select channel
120, press 1 2 0.
TO SELECT DIGITAL CHANNELS
Press the first 3 digits, then press the “–/DISPLAY” button,
followed by the remaining 3 digits.
Example, to select channel 015-001, press 0 1 5 – 0 0 1.
It will be displayed as “AUDIO ONLY”, when the channel has
only an audio content.
It will be displayed as “DIGITAL CHANNEL SIGNAL
STRENGTH IS LOW”, when a digital signal is weak.
It will be displayed as “DIGITAL CHANNEL IS SCRAMBLED”,
when a subscription channel is received.
NOTES:
TV CABLE
VHF
2-13
UHF
14-69
VHF
2-13
STD/HRC/IRC
14-36 (A) (W)
37-59 (AA) (WW)
60-85 (AAA) (ZZZ)
86-94 (86) (94)
95-99 (A-5) (A-1)
100-125 (100) (125)
01 (5A)
TV - VHF/UHF channels
CABLE - CABLE TV channels
ANT
ABCD
12
PICTURE
SIZE
-/
VHF/UHF/CABLE CHANNELS
J3W40621B_En_P18-24 15/02/2006, 7:26 PM18