Filter
Top Products
< Control LCD & PDP through Serial Port >
1. How to connect external equipment
- Connect the serial port of external equipment to the RS-232C jack of the monitor
back panel.
- RS-232C cables not included with the Monitor.
- The remote control and LCD&PDP front panel buttons (except main power) doesn’t
operate when controlling LCD&PDP set by PC.
DVI INPUT
RGB PC INPUTAUDIO INPUT
Com1Com2
RS-232C Cable
<PDP>
<PC>
RS-232C
- Type of connector : D-Sub 9-Pin female to female
No conection9
No conection8
No conection7
No conection6
GND5
No conection4
TXD (Transmit data)3
RXD (Receive data)2
No conection1
Pin NameNo.
[NOTE]
* Use a crossed (reverse) cable.
- Cable Side (female) -
Harsper R&D
2005. 4. 20.