Insignia 09-0929 Blu-ray Player User Manual


  Open as PDF
of 2
 
ENGLISH 09-0929
© 2009 BBY Solutions, Inc. All rights reserved. INSIGNIA is a trademark of BBY Solutions, Inc. Registered in some countries. All other products and brand names are trademarks of their respective owners.
8 Press or to highlight the Password eld, then press
ENTER. An on-screen keyboard appears.
9 Press , , or to highlight the rst letter in the
password, then press ENTER. Repeat this step to enter
the rest of the password. If you make a mistake, use the
backspace key to delete the character
10 After you enter the password, highlight , then press
ENTER to close the keyboard.
11 Press to highlight OK, then press ENTER. The Network
List reopens.
12 If necessary, press or to highlight the network again,
then press ENTER. The option list reopens.
13 Press or to highlight Connect, then press ENTER. If
the wireless network is working, you should see the
message shown below:
You may also briey see a “connected” message appear on
the TV. Press ENTER to remove the message from the TV
screen.
If the message shown above does not appear, your Blu-ray
player is not connected to the network. Repeat this task again.
Connecting to a wireless network using WPS
(Wi-Fi Protected Setup) Push button
NOTE: The steps in this task are based on using the remote control that came
with your player.
To set up a network connection:
1 Press ENTER. The Settings menu opens.
2 Press or to select Network. The Network menu opens.
3 Press , press or to highlight Wireless, then press
ENTER. A list of network options opens.
4 Press or to highlight WiFi Protected Setup, then
press ENTER. The following screen appears.
5 Press the WPS button on your router. The following
screen should appear. When you see “Success” on the
screen, your player is connected to the router.
6 Press ENTER to close the message.
 previous