Insignia NS-28DD310NA15 CRT Television User Manual


  Open as PDF
of 2
 
CABLE
QUICK SETUP
GUIDE
28" LED TV/DVD Combo
NS-28DD310NA15
Included accessories
Which cables do you have?
Your TV has several dierent jacks for connecting devices. For the
best video quality, use the best available connection. Use the cables
that came with your devices.
Note: You can also connect a DVI device to your TV. See your online User Guide for
connection instructions.
Note: Images may not necessarily represent the exact design of your television.
Thank you
for purchasing this state-of-the-art
Insignia television. We hope you enjoy
the quality and reliability of this
television for years to come.
FIND YOUR
USER GUIDE ONLINE!
We are going green so a copy of your
User Guide is not provided in the box
but is available online.
Go to www.insigniaproducts.com,
then click Support & Service. Enter your
model number in the box under Manual,
Firmware, Drivers & Product
Information, then click .
Features
Front view
Back view
OVER
VIDEO QUALITY
BEST
BETTER
GOOD
GOOD
HDMI video/audio
Component video and analog audio
Composite video and analog audio (AV)
Coaxial video/audio
JACK TYPE CABLE CONNECTOR
STOP!
Do not plug your
power cord in until all
other devices have
been connected.
Multipurpose jacks: You can plug any
device that uses HDMI into any HDMI
jack. However, certain devices must be
connected to the HDMI1/DVI (ARC)
jack. See the instructions that came
with your ARC or DVI device for more
information.
Note: The HDMI1/DVI (ARC) jack is a
shared jack. This means you can only
connect one DVI or ARC device at a
time.
Note: The component video and AV
jacks are shared. This means you can
connect only one component video or
AV device at a time. We suggest using
HDMI if your device supports it.
Using an HDMI cable (BEST)
How do I connect my TV to an antenna or cable wall jack?
MAKING CONNECTIONS
How do I watch TV (cable or satellite receiver) or connect a device such as a DVD or
Blu-ray Disc player, game console, or camcorder?
- OR -
How do I prepare my TV for wall mounting?
(not for use with a TV stand)
You’ll need: A soft surface to lay the TV on.
A Carefully place your TV face-down on a cushioned, clean surface to protect the screen from damages and scratches.
B See the instructions that came with your wall mount for more information about how to correctly mount your TV.
START HERE
How do I attach the stand to my TV?
(not for wall mounting)
You’ll need: A Phillips screwdriver and a soft surface to lay the TV on.
A Carefully place your TV face-down on a cushioned, clean surface to
protect the screen from damages and scratches.
B
Secure the stand column to your TV with the three provided B4 16 mm screws.
(the shorter screws).
C
Secure the TV stand to the stand column with the four provided B4 18 mm screws.
(the longer screws).
A
B4 type 16 mm screws
B4 type 18 mm screws
B
A
Note: Connect the yellow video cable
connector to the green VIDEO/Y jack
on the back of your TV.
Power indicator
Remote control sensor
D
V
D
Remote control
and two AAA batteries
T
Stand column
V stand
B4 screws (18 mm length)
(4 pcs. )
B4 screws (16 mm length)
(3 pcs.)
Before using your new product, please read these instructions to prevent any damage.
(ARC)
Using component cables (BETTER)
- OR -
Using an AV cable
(GOOD)
Component cable option
AV cable option
AUD
I
O/VIDEO
OUT
AUDIO/VIDEO OUT
INPUTMENU
CH
CH
VOL+VOL- POWER
EJECT
(ARC)
(ARC)
Note: The control buttons are on the
bottom edge of the screen.