Insignia NS-50D400NA14 CRT Television User Manual


 
6
www.insigniaproducts.com
Outputs (both models)
Audio
Power
Miscellaneous
Legal notices
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measure:
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help
Warning
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
IC Statement
This device complies with Industry Canada licence-exempt RSS
standard(s).
Operation is subject to the following two conditions: (1) this device may
not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment.
Canadian Notice
CAN ICES-3 (B)/NMB-3(B)
Standard Television Receiving Apparatus — Appareil de réception
télévision ordinaire, Canada BETS-7 / NTMR-7
Cables
Connections to this device must be made with shielded cables with
metallic RF/EMI connector hoods to maintain compliance with FCC Rules
and Regulations.
Dolby License Notice and Trademark Acknowledgement
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
HDMI
The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other
countries.
DTS Sound™
Manufactured under license from DTS Licensing Limited.
DTS, the Symbol, & DTS and the Symbol together are
registered trademarks and DTS Sound is a trademark of
DTS, Inc. © DTS, Inc. All Rights Reserved.
MHL™ (Mobile High-Definition Link)
MHL and the MHL logo are trademarks or
registered trademarks of MHL Licensing, LLC
in the United States and other countries.
Energy Star
Your Insignia TV is ENERGY STAR® qualified in the “Energy
Savings” mode. It meets strict energy efficiency guidelines set
by the U.S. Environmental Protection Agency and Department
of Energy. ENERGY STAR is a joint program of these
government agencies, designed to promote energy efficient
products and practices. Changes to certain features, settings,
and functionalities of this TV (i.e. Picture, Sound) can increase
or change the power consumption. Depending upon such
changed settings, the power consumption may exceed the
limits required for the ENERGY STAR qualification in the
“Energy Savings” mode.
DVI
1 (side)
HDMI 3/DVI jack
USB
1 (side)
Supports JPEG and firmware upgrade
Antenna/Cable 1 (back)
Video No
Analog audio/Headphone 1 (side)
Digital audio 1 (optical) (back)
WiFi No
Ethernet No
NS-46D400NA14 NS-50D400NA14
DTS Tuning Package DTS sound DTS sound
Speakers
Number: 2
Watts per channel: 7W
Number: 2
Watts per channel: 8W
NS-46D400NA14 NS-50D400NA14
Power
consumption
On: 115W
Standby: <1W
On: 130W
Standby: <1W
Power input
AC 120 V, 60Hz AC 120 V, 60Hz
NS-46D400NA14 NS-50D400NA14
OSD languages English, French, Spanish English, French, Spanish
INlink Ye s Ye s
MHL-enabled Yes (HDMI 2/MHL jack) Yes (HDMI 2/MHL jack)
Game Mode No No
ENERGY STAR qualified Ye s Ye s
Internet connectable No No
TV base screws
Stand column to TV
screen:
M4 type (10 mm length)
(5 pcs)
Base to stand column:
M4 type (27 mm length)
(4 pcs)
Stand column to TV
screen:
M4 type (10 mm length)
(5 pcs)
Base to stand column:
M4 type (27 mm length)
(4 pcs)
V-Chip
(version 2.0)
Ye s Ye s
Sleep timer Ye s Ye s
Channel labeling Ye s Ye s
VESA mount (mm)
(Hor. ×Ver.)
200 × 200 300 × 200
VESA mount screws
M6 M6
Note
The length of the wall-mount screws vary
depending on the wall-mount bracket you
purchased. See the instructions that came with the
wall-mount bracket for screw lengths.