Insignia NS-LCD32F Flat Panel Television User Manual


 
14
Insignia NS-LCD26F/NS-LCD32F/NS-CL26C LCD TV
www.insignia-products.com
Using repeat play
You can repeat tracks or the entire CD using
repeat play.
To use repeat play:
1 While the CD is playing, press REPEAT to
scroll through the options:
Single - (play current track)
Repeat One - (repeat current track)
Repeat Folder - (repeat current folder)
Folder - (play current folder)
2 To stop repeat playback, do one of the
following:
Press REPEAT until “Folder” disappears
from the screen.
Press STOP twice.
Eject the CD.
Changing the audio mode
To change the audio output of a
multi-channel CD:
During CD playback, press AUDIO. The
setting changes each time you press the
button:
Mono Left
Mono Right
Mix-Mono
•Stereo
Selecting a track for playback
To select a specific track for playback:
After you load a CD into the player, and after
the player finishes reading the disc, press the
number buttons to enter the track number,
then press PLAY/ENTER to play the track.
Playing a Kodak picture CD or JPEG disc
To play a Kodak picture CD or JPEG disc:
1 Press POWER to turn on the player.
2 Press TV/DVD to select DVD.
3 Press OPEN/CLOSE to open the disc
tray.
4 Place the disc in the disc tray, then press
OPEN/CLOSE to close the disc tray. The
disc navigation menu opens.
5 Press to select the file you want, then
press PLAY/ENTER to confirm. The
slideshow begins.
6 During playback:
Press PAUSE/STEP on the remote, to
stop the picture and press PLAY/ENTER
resume normal play.
Press to skip to the previous track,
and press to skip to the next track.
Press repeatedly to continue skipping
back or forward.
To completely stop disc playback, press
STOP twice.
7 Press OPEN/CLOSE to remove the disc.
Magnifying the image
You can enlarge or reduce the display image
while the disc is playing or while it is paused.
To magnify the image:
1 While a disc is playing, press ZOOM. The
image is magnified 2×. Continue pressing
ZOOM to magnify the image 3×, then 4×.
While the image is magnified, press the
and buttons to move the
picture on the screen.
2 To return to normal picture size, press ZOOM
until the picture returns to normal.
Playing an MP3 disc
To play a MP4 disc:
1 Press POWER to turn on the player.
2 Press TV/DVD to select DVD.
3 Press OPEN/CLOSE to open the disc
tray.
4 Place the disc in the disc tray, then press
OPEN/CLOSE to close the disc tray. The
disc navigation menu opens.
5 Press to select the folder you want,
then press PLAY/ENTER to enter the folder.
6 Press to select the file you want, then
press PLAY/ENTER to see the file.
7 Press to go to the previous menu.
Customizing TV settings
Opening and navigating the on-screen
menus
Using the on-screen menu
Your TV has an on-screen menu system that lets
you adjust TV settings, such as video and audio
settings.
To use the on-screen menu:
1 Press MENU on the TV or remote control,
then press VOL- or VOL+ to access the
menu you want.
2 PressCH- or CH+ to select the menu item,
then press VOL- or VOL+ to adjust/change
that item or go to the sub-menu for that item.
3 Press MENU to close the on-screen menu.
Tip
If the track number is under 10, press buttons 1-9
to select it. If the track number is 10, press 10+
once, then button 0 to select it. If the track number
is over 10, press 10+ once, then a button 1-9.
Note
This DVD player plays most MPEG4 encoded
discs, but some discs with the MPEG4 logo are
not encoded by MPEG technology and will not
play well in this player.