Filter
Top Products
7
Insignia NS-LCD37-09 37" LCD TV
www.insignia-products.com
For HDMI—Plug one end of an HDMI cable
into the HDMI1 INPUT (1) or HDMI2 INPUT
(4) jack on the back of your TV, then plug the
other end into an HDMI device.
2 Turn on your TV.
3 Press INPUT repeatedly to select the
external signal source you want to watch.
4 Turn on external signal source.
5 Insert a disc or videotape into the external
signal source, then press PLAY.
Connecting a computer
You can connect a computer using the HDMI or
VGA jack on the back of your TV.
To connect a computer using VGA:
1 Plug a VGA cable from your computer into
the VGA jack on the back of your TV.
2 Plug an audio cable from your computer’s
audio out jack into the AUDIO jack on the
back of your TV.
3 Plug in and turn on your TV.
4 Press INPUT repeatedly to select the VGA
input source.
To connect a computer using HDMI:
• Plug an HDMI cable into the HDMI INPUT
jack on the back of your TV and into the
HDMI Out jack on the back of the computer.
Warning
Make sure that you turn off and unplug your TV
before installing devices.
Note
When the computer goes into standby mode, your
TV turns off. If your TV does not turn on when you
“wake” your computer, press the POWER button
on your TV or remote control.
SPDIF
1 2
VGA
AUDIO
PC IN
AUDIO
OUT
COMPONENT 2
COMPONENT 1
AV 1 IN
Pr Pb
Pr Pb
ANTENNA / CABLE
DIGITAL / ANALOG
VGA jackAudio jack
3
HDMI jack