Filter
Top Products
11
SN 29343266 DPC-5.2
Rear Panel
For operational instructions, see the page indicated in brackets [ ].
1 RS 232 port
This port is to be used in conjunction with an external controller
to control the operation of the DPC-5.2 using an external device.
2
VIDEO OUTPUT COMPONENT (P
R
/P
B
/Y) jacks [15]
If your TV has component inputs, you can connect a component
video cable to your TV and to your DVD Changer for ideal
video quality. The component video cable only carries the video
signal; remember to connect the left and right audio cables.
3 VIDEO OUTPUT S VIDEO jack [15]
If your TV has a S-Video jack, you can connect an S-Video
cable to your TV and to your DVD Changer for improved video
quality. The S-Video cable only carries the video signal;
remember to connect the left and right audio cables.
4 VIDEO OUTPUT VIDEO jack [14]
Connect a video cable to this jack and to the Video Input jack on
your TV.
AC
INLET
COMPONENT
VIDEO OUTPUT
AUDIO
OUTPUT
DIGITAL OUTPUT
VIDEO
S
VIDEO
P
B
P
R
Y
L
R
RS 232
DVD
CHANGER
MODEL NO.
DPC-5.2
OPTICAL
COAXIAL
2134567 8
Control Position and Names
5 AUDIO OUTPUT jacks [14-16]
Insert audio cables (left and rights) to these jacks on your DVD
Changer and to the corresponding Audio Input jacks (left and
right) on your TV or receiver.
6 DIGITAL OUTPUT COAXIAL jack [16]
Use coaxial cable (not provided) to connect your DVD Changer
to an AV component that features digital input capability. If the
component has a Dobly Digital or DTS decoder, you can enjoy
theater-quality multichannel sound.
7 DIGITAL OUTPUT OPTICAL jack [16]
Use optical cable (not provided) to connect your DVD Changer
to an AV component that features digital input capability. If the
component has a Dobly Digital or DTS decoder, you can enjoy
theater-quality multichannel sound.
8 AC INLET [16]
Use to connect the power cord to the wall outlet.