Jasco AV93299 TV Converter Box User Manual


 
3
INTRODUCTION
Your Video Converter (RF Modulator) is designed to convert
the separate audio and video signals (from a DVD, video
camera, or video game, for example) into VHF TV signals
that you can view on a TV set equipped with only a 75 Ohm
(F-type) input.
The FCC Wants You to Know
This device complies with Part 15 of FCC Rules. Operation is
subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must
accept any interference received, including interference that
may cause undesired operation.
Your modulator might cause TV or radio interference even
when is operating properly. To determine whether your mod-
ulator is causing the interference, turn it off. If the interfer-
ence goes away, your modulator is causing it.
Try to eliminate the interference by:
moving your RF Modulator away from the receiver
connecting your RF Modulator to an outlet that is on a
different electrical circuit from the receiver
contacting your lcoal store for help
If you cannot eliminate the interference, the FCC requires
that you stop using your RF Modulator. Changes or modifi-
cations not expressly approved by the party responsible for
compliance could void the user’s FCC authorization to oper-
ate this equipment.
2
NOTE TO CATV SYSTEM INSTALLER:
This reminder is provided to call the CATV system installer’s
attention to Article 820-40 of the NEC that provides guidelines for
proper grounding and, in particular, specifies that the cable
ground shall be connected to the grounding system of the build-
ing, as close to the point of cable entry as practical.
WARNING:To prevent fire or shock hazard, do not expose this
product to rain or moisture. This unit for indoor use only
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER OR BACK. NO USER-
SERVICE-ABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED PERSONNEL.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within
the product’s enclosure that may be of sufficient mag-
nitude to constitute a risk of electric shock to persons.
The exclamation point with an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
Notice :The changes or modifications not expressly approved by
the party responsible for compliance could void the user‘s
authority to operate the equipment.
!
!
RF Modulator Book 9/17/03 1:28 PM Page 2