Filter
Top Products
9
SPECIFICATIONS
Video Carrier Output Level . . . . . . . . . . . . . . . . . . . . . . . .69dB_V
RF Output Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 or 4
RF Output Impedance . . . . . . . . . . . . . . . . . . . . . . . . . . .75 Ohms
Video Input Impedance . . . . . . . . . . . . . . . . . .75 Ohms/1K Ohms
(Switchable)
Audio Input Impedance . . . . . . . . . . . . . . . . . . . . . . .13_3K Ohms
TV to ANT Insertion Loss 50 - 806 MHz . . . . . . . . . . . . . . . . .-2dB
Dimensions . . . . . . . . . . . . . . . . . . .513/16 x 31/16 x 17/16 inches
(148 x 78 x 37 mm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 lb 2.5 oz
.524 kg
Specifications are typical; individual units might vary.
Specifications are subject to change and improvement
without notice.
8
2. Set the RF Modulator’s CHANNEL 3/4 switch to the
same channel you set the TV (3 or 4).
3.Turn on the connected video source and set OHMS
75/1K on the RF Modulator to the position that gives
the best picture. The video signal indicator on the RF
Modulator lights when the modulator is receiving a
signal for an A/V source.
CARE
To enjoy your RF Modulator for a long time:
• Keep the modulator dry. If it gets wet, wipe it dry
immediately.
• Use and store the modulator only in normal temperature
environments.
• Handle the modulator gently and carefully. Don’t drop it.
• Keep the modulator away from dust and dirt.
• Wipe the modulator with a damp cloth occasionally to
keep it looking new.
Modifying or tampering with the modulator’s internal
components can cause a malfunction and invalidate its
warranty and void your FCC authorization to operate it. If
your modulator is not performing as it should, take it to
your local store for assistance.
RF Modulator Book 9/17/03 1:28 PM Page 8