Filter
Top Products
RM24925
Thank you for purchasing the GE Universal
Remote Control. This product is designed
to provide years of service operating a wide
variety of video and audio equipment.
Please retain this guide for future reference.
Table of Contents
Install the Batteries 1
Button Description 2-4
Programming for TV 5
Programming for VCR 6
Programming For DVD 7
Programming For DBS System 8
Programming For Cable 9
Programming For Audio 10
Programming For AUX 11
Operating Audio Function 12-13
Sleep Functions 14
Menu Functions 15
Programming With Code Search 16
Identifying Codes For Your Remote 17
Trouble Shooting 18
Warranty 19
Lost Codes 19
This Universal Remote Control is already
programmed for most GE, RCA and ProScan
TVs, VCRs, DBS Systems, DVD Players, and
Audio/Video Receivers.
NOTE: For users of GE, RCA and ProScan
DBS Products, older DBS models require that
the DISPLAY Button on this remote be used
to make program selections. Use the SELECT
Button for making program selections on
newer GE, RCA and ProScan DBS models.
Battery Installation
Your Universal Remote Control requires 2 AAA
alkaline batteries.
To install the batteries:
1. Turn the remote over and push down on the
cover and slide it off.
2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Insert the batteries, matching the batteries to the (+)
mark inside the battery case.
3. Slide the battery cover back into place.
NOTE: Programmed codes will remain in memory
for a short period of time allowing for battery
replacement. If batteries have been dead for a
prolonged period of time, reprogramming may be
1