Filter
Top Products
98
Using Your Remote
Code Identification
The Code Identification Feature allows you to
identify the 4 digit library code stored under your
device key. For example, if you want to find out what
4 digit code is stored under your TV device key,
follow the six steps below:
1. Press and hold the SETUP button until
the red indicator stays on. Release the
SETUP button.
2. Press and release the desired mode
button (TV, VCR, etc.). The red
indicator blinks, then stays lit.
3. Press and release the SETUP button.
The red indicator blinks once and
remains lit.
4. To find the first digit for
the code stored under
the mode key pressed
in step 2, press each
numeric key from 0-9
in turn. The number
that causes the
indicator light to blink
is the first digit in your
code.
5. To find the second digit, repeat step 4, this time
when the red indicator blinks off this is the
second digit.
6. Repeat step 4 to find the third and fourth digits.
Using Your Remote, cont.
Sleep Function
The Sleep button enables the remote to turn off
your TV after a period of 1 to 99 minutes as shown
below. The remote must be in TV mode to set a
Sleep Timer. This feature works even if your TV
does not have a sleep feature.
1. Press and release the TV mode button.
4. Press and release the
numeric keys (01-99)
for the time required.
The LED will blink off
to indicate button
press acceptance.
5. TV Sleep Timer is set.
2. Press and hold the Sleep button
until the LED remains lit (about 2-3
seconds).
3. Release the Sleep button.
6. Leave the Remote pointing towards the TV
with an unobstructed path.
To cancel the Sleep Timer, press and hold the
Sleep button until the LED blinks, or press and
release the Power key in TV mode.
S
E
T
U
P
S
E
T
U
P
S
L
E
E
P