Filter
Top Products
11
Identifying Codes From Your
Universal Remote
If you need to find the three-digit code for
your device after your device is set-up, use
this procedure.
1. Press and hold SETUP
until the INDICATOR
LIGHT lights, then
release SETUP.
2. Press and release
the device but-
ton for the code you
are retrieving. The
INDICATOR LIGHT
will blink once.
3. Press and release SETUP.
The INDICATOR
LIGHT will turn blink
and remain lit.
4. Starting with 0 on the
keypad, press the num-
ber buttons in order (0-
9) until the INDICATOR
LIGHT blinks.
5. The number which
causes the INDICATOR
LIGHT to blink is the
first digit of your code.
6. Repeat Step 4 until
you have retrieved all
three numbers in the
code. The INDICATOR
LIGHT will go off after
the third number is retrieved.